RuO2 electrode surface effects in electrocatalytic oxidation of glucose

We have studied the electrocatalytic activity of RuO₂-PVC film electrodes, fabricated using RuO₂ powders prepared at five different temperatures, viz., 300, 400, 500, 600 and 700°C, for the oxidation of glucose in high alkaline media, 1 to 3 M NaOH. The RuO₂-PVC film electrodes have been first characterized in 1 to 3 M NaOH solution by cyclic voltammetry (CV) and rotating disc electrode (RDE) techniques in a wide potential range −1,100 to 450 mV (SCE), and three redox pairs representing Ru(IV)/Ru(III), Ru(VI)/Ru(IV) and Ru(VII)/Ru(VI) transitions have been identified. The voltammetric peaks at low sweep rates have been analyzed using surface activity theory formulated for interacting electroactive adsorption sites, and interaction terms have been evaluated. The total voltammetric surface charges have been analyzed as per Trassatti’s formalism with respect to their dependence on potential sweep rate, and charges associated with less accessible and more accessible surface sites have been calculated. For glucose oxidation, the results have indicated that RuO₂ (700°C)-PVC electrode shows two oxidation peaks in contrast to RuO₂ (300°C)-PVC electrode. Also, RuO₂ (700°C)-PVC electrode exhibits higher intrinsic electrocatalytic activity than the 300°C electrode, although the former possesses lower electrochemically active surface area. Additionally, kinetic analyses made from RDE results with reference to Michealis–Menten (MM) enzyme catalysis has shown that RuO₂ (700°C) electrode possesses extended glucose-sensing range in terms of MM kinetic constant, K _M , compared to other electrodes. Possible reasons for such differences in the behavior of the electrodes of different temperatures towards glucose oxidation are identified from studies on oxidation of glucose in solutions of different pH, oxidation of different glucose derivatives, and also from physicochemical results from BET, XRD, SEM, DTGA, XPS analysis of RuO₂ powder samples.     

Palladium‐Catalyzed 2‐Phenylethenylation of Codeine: 8‐[(1E)‐2‐Phenylethenyl]codeinone Dimethyl Ketal as the Unexpected ‘Masked’ Diene for the Preparation of 19‐Substituted Diels–Alder Adducts of Thebaine

In a search for starting materials for the preparation of 7,8‐fused morphine alkaloid derivatives, 8‐[(1E‐2‐phenylethenyl]codeinone dimethyl ketal ( 4 ) and 8‐[(1E‐2‐phenylethenyl]codeine ( 5 ) were prepared. These dienes were used as substrates in the Diels–Alder reactions. Compound 5 formed the ‘normal’ adduct 12 with N‐phenylmaleimide, while compound 4 behaved in reactions with dienophiles as the ‘masked’ diene 11 , a 8‐[(1E)‐2‐phenylethenyl]‐substituted thebaine, yielding the corresponding 19‐substituted 6,14‐endo‐etheno‐6,7,8,14‐tetrahydrothebaines. Specifically, reaction of 4 with methyl vinyl ketone gave rise to 19‐[(1E)‐phenylethenyl]thevinone ( 14 ) whose structure was elucidated by an X‐ray diffraction analysis. The thebaine derivative 11 was also prepared from 4 .     

Gold nanoparticle-enhanced surface plasmon resonance measurement with a highly sensitive quantification for human tissue inhibitor of metalloproteinases-2

Two different methods for the quantification of human tissue inhibitor of metalloproteinases-2 (TIMP-2) were developed using surface plasmon resonance (SPR) and gold nanoparticles for signal enhancement. The first method, a competitive assay, used TIMP-2 immobilized to the sensor surface and the inactive form of matrix metalloproteinase-2 (proMMP-2) (EC 3.4.24.24) adsorbed to gold nanoparticles. The sensor signals resulting from the interaction of MMP-2-gold nanoparticles with immobilized TIMP-2 were inversely proportional to the amounts of TIMP-2 of the sample. The measuring range for TIMP-2 was about 15–180 pM. The second method, a one-step sandwich assay, used proMMP-2 immobilized to the sensor surface and an anti-TIMP-2 monoclonal antibody coupled to gold nanoparticles. The lower detection limit of this assay format was 0.5 pM of TIMP-2. The binding signals were highly reproducible up to 100 pM of the inhibitor. The improvements obtained in TIMP-2 quantification over already existing tests could contribute to a better understanding and diagnosis of diseases like cancer.     

Synthesis of substituted pyrido[1,2-<Emphasis Type="Italic">a</Emphasis>]pyrimidines from 2-arylmethylidene-3-fluoroalkyl-3-oxopropionates

Cyclocondensation of 2-arylmethylidene-3-fluoroalkyl-oxopropionates with 2-amino-pyridine occurs at both the polyfluoroacylvinyl and alkoxycarbonylvinyl fragments to give alkyl 4-aryl-2-polyfluoroalkyl-4H-pyrido[1,2-a]pyrimidine-3-carboxylates and 4-aryl-2-hydroxy-3-polyfluoroacyl-4H-pyrido[1,2-a]pyrimidines, respectively. When treated with copper(II) acetate, the pyrido[1,2-a]pyrimidines yield metal complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2745–2749, December, 2005.     

Synthesis of thieno[3.2-<Emphasis Type="Italic">b</Emphasis>]pyrrolenine derivatives under the Fischer reaction conditions

The reaction of alkyl 4-(2-acetylhydrazino)-2-methyl-3-thiophenecarboxylates with 3-methylbutan-2-one was carried out under the Fischer reaction conditions. The influence of Lewis acids and solvents on the process was studied. A convenient method for the synthesis of thieno [3.2-b]pyrrolenine derivatives was proposed.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 725–729, March, 2005.     

Compositional changes in lime-based mortars exposed to different environments

Specimens of aerial and hydraulic lime-based mortars to be used in restoration works were prepared, hardened and subjected to different environments to study their compositional changes during setting, hardening and exposure to environment. Outside exposure, weathering cycles in a climatic chamber, SO₂-rich environment and indoor exposure (as control group) were selected to expose the mortars. XRD, FT-IR and TG-DTA analyses were performed at 7, 14, 21 and 28 days to determine the chemical and mineralogical composition, as well as the formation of the degradation products. Outside and SO₂-chamber exposures and increasing the relative humidity allowed faster carbonation (enhancing CO_2(g) dissolution) and hydration of hydraulic compounds. In SO₂-chamber, sulfate attack appears as a surface phenomenon, giving: gypsum in aerial specimens and gypsum and syngenite in hydraulic specimens.     

Aminomethylation of hindered 2-propargyl-1,3-diketones

2-Propargyl-substituted methoxy-1,3-diketones react with alkoxymethylamines or paraform and secondary amines in the presence of CuCl at the acetylene group to afford Mannich bases.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1293–1295, May, 1996.     

Adsorption of Pb(2+) ions on nanosized gamma-Fe(2)O(3): formation of surface ternary complexes on ligand complexation

Adsorption of Pb²⁺ ions on the combustion derived nanosized γ-Fe₂O₃ and its thiourea complex composite is reported. The adsorbents upon adsorption of Pb²⁺ ions are characterised by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis and infrared spectroscopy techniques. The eluent is characterised by atomic absorption spectroscopy for the estimation of Pb²⁺ ions. The reduction in the amount of lead after adsorption was estimated to be around 50% in case of complex composite adsorbent and around 15% in case of the γ-Fe₂O₃ adsorbents. Orthorhombic PbSO₄ precipitated out from the eluent and is reported with a model reaction. Adsorption of lead onto the complex composite is explained through the formation of a surface tertiary complex. The advantage of employing a thiourea-γ-Fe₂O₃ complex composite as solid adsorbent for the adsorption of heavy metal pollutants is envisaged in the present investigation.     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Redox behavior of V/MgO catalyst in H2S wet oxidation at room temperature

The room temperature wet catalytic oxidation was conducted in a batch reactor with V/MgO catalyst. The XRD study of the catalyst used indicated that V/MgO could not only oxidize H2S to sulfur selectively, but also prevent the sulfidation of metal oxide effectively at the room temperature. The XPS study indicated that the H2S oxidation with V/MgO could proceed by a redox mechanism (V⁵⁺↔ V⁴⁺) and that V³⁺ formation (V⁴⁺→ V³⁺), was responsible for the deactivation of V/MgO. This revised version was published online in June 2006 with corrections to the Cover Date.